Лазурь Pentacolor Ultra Lasur, африканский тик, 3 l

It forms a highly elastic and highly resistant film for the environmental impact of silk gloss.
Water-based wood protection and finishing tool for interior and exterior works for wooden products, garden furniture, railings, wooden houses, fences, roofs. Optimal wood protection from harmful UV rays, long-lasting color. Coated surface exposed to heat is not sticky. Due to the long-lasting coating, the elasticity of the coating does not break and does not bounce under high temperature changes. Characterized by mild odor. Suitable for painting new or renovating old surfaces as a base (impregnating), intermediate and top coat.

USERS MANUAL Stir well for 2-3 minutes before use. Apply with a brush or roller on a flat, clean, unpainted and untreated surface that removes dust and oil residues. Squeezes must be cleaned mechanically or using suitable solvents. It is recommended that the surface be disinfected using suitable biocidal products. Primer / impregnation - Coating one layer of Pentacolor Ultra Lasur diluted with water in a ratio of 1: 1. Painting - Pentacolor Ultra Lasur 1 - 2 layers undiluted, depending on the desired effect. After 30 min. The second coat can be applied after 1-2 hours. (when the first coat is dry). Completely dries within 24 hours depending on temperature and humidity. Work at temperatures above 5 ° С. Clean the tools and smeared surfaces with water until they are dry. Protect from frost. Impregnation yield (dilution ratio 1: 1) - 50-70 ml / m² per layer; for the upper layer (without dilution) - 90-120 ml / m² per layer.