Информация о товаре
Описание товара на английском языке:
PROLITE 66 TRIPLE BUTTED ALUMINUM
Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.
HFS - HYDRO FORMING SYSTEM
Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.
FLEX-STAY
The seat and chainstay profile and carbon lay-up schedule are adapted to work like a flat leaf spring, absorbing surface bumps and reducing vibrations.
X-TAPER HEADTUBE
Using a tapered head tube with 1 1/8" bearings in the top and 1 1/4" or 1 1/2" in the bottom creates superb stiffness and precise, confidence inspiring steering.
SMOOTH WELDING
Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance you will be convinced it is carbon.
INTERNAL CABLE
Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.
DOWN TUBE EXIT
Ensures that internally routed cables and wires can move freely without causing any trouble whilst remaining easily accessible for servicing.
SMART ENTRY
Cables, housings and brake hoses are clamped under tension to prevent rattling when the trail gets rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.
DI2 READY
Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.
REMOTE LOCK-OUT
The suspension fork and/or rear shock can be locked, either directly or via a ‘remote control’ lever on the handlebar.
C-S POST MOUNT DISC
Post mount disc brake calipers fit directly onto the seat stay for a strong and light connection whilst a chainstay post mount positions the caliper on the chainstay within the rear triangle for extra protection and better distribution of braking forces. Another benefit is that internal cable routing is also easier and neater via the chainstay.
15-100 THRU-AXLE
Selected front forks use a 100 mm wide through axle 12 or 15 mm in diameter to increase lateral stiffness. A 142 mm wide 12 mm rear axle fixed directly into the frame increases rear end stiffness whilst simplifying wheel removal and replacement.
12-148 THRU-AXLE ‘Boost’
New Boost standard – wider axle widths; 110 mm front and 148 mm rear, allowing a shallower spoke angle for stiffer wheels, especially beneficial in 29ers.
PROLITE 66 TRIPLE BUTTED ALUMINUM
Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.
HFS - HYDRO FORMING SYSTEM
Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.
FLEX-STAY
The seat and chainstay profile and carbon lay-up schedule are adapted to work like a flat leaf spring, absorbing surface bumps and reducing vibrations.
X-TAPER HEADTUBE
Using a tapered head tube with 1 1/8" bearings in the top and 1 1/4" or 1 1/2" in the bottom creates superb stiffness and precise, confidence inspiring steering.
SMOOTH WELDING
Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance you will be convinced it is carbon.
INTERNAL CABLE
Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.
DOWN TUBE EXIT
Ensures that internally routed cables and wires can move freely without causing any trouble whilst remaining easily accessible for servicing.
SMART ENTRY
Cables, housings and brake hoses are clamped under tension to prevent rattling when the trail gets rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.
DI2 READY
Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.
REMOTE LOCK-OUT
The suspension fork and/or rear shock can be locked, either directly or via a ‘remote control’ lever on the handlebar.
C-S POST MOUNT DISC
Post mount disc brake calipers fit directly onto the seat stay for a strong and light connection whilst a chainstay post mount positions the caliper on the chainstay within the rear triangle for extra protection and better distribution of braking forces. Another benefit is that internal cable routing is also easier and neater via the chainstay.
15-100 THRU-AXLE
Selected front forks use a 100 mm wide through axle 12 or 15 mm in diameter to increase lateral stiffness. A 142 mm wide 12 mm rear axle fixed directly into the frame increases rear end stiffness whilst simplifying wheel removal and replacement.
12-148 THRU-AXLE ‘Boost’
New Boost standard – wider axle widths; 110 mm front and 148 mm rear, allowing a shallower spoke angle for stiffer wheels, especially beneficial in 29ers.
Часто покупают вместе
Беспроцентный лизинг на 12 мес.
1 989,00 €
Обычная цена
3 149,00 €
Беспроцентный лизинг на 12 мес.
Электрический четырёхколёсный мотороллер Lunar QC, 20000 мАч, 0.5 кВт, красный цв.
Обычная цена
2 019,00 €
Электрический четырёхколёсный мотороллер J4 EEC, 65000 мАч, 1 кВт, красный цв.
Обычная цена
5 390,00 €
Обмотка руля ACID CC 3.5 CMPT black'n'neon yellow GRIP420, пластик/полиуретан, черный цв./желтый цв.
30,79 €
Обычная цена
49,90 €
