Информация о товаре
Описание товара на английском языке:
Insulating, highly adhesive special primer to prevent the creation of water stains, mould, nicotine, tar, bitumen etc. Can be used on plaster, hard fibre boards, wood, stone and concrete. Ideal for ceilings and walls indoors.
Application: Sealing primer for effective "blocking" of water stains, mould, nicotine etc. and for improving the adhesion of subsequent paint coats.
Product benefits:
Binding agent base: Special coating resins
Spray application: for 2 -3 cross coats: 40-50 μm
Spray distance: 15-25 cm
Drying times: dust-dry: after approx. 20 min.
Fast-to-handling: after approx. 60 min.
Dry-hard: after approx. 12 hours
Recoating: Can be painted over with all belton paints (also clearcoat) after 3 hours
With itself: at any time
Paint structure:
Note: Before priming, clean, degrease and remove any rust from objects that are to be painted. To ensure optimum adhesion of the paint, sand before and after priming. The surface to be painted must be clean, dry and free of grease.
Insulating, highly adhesive special primer to prevent the creation of water stains, mould, nicotine, tar, bitumen etc. Can be used on plaster, hard fibre boards, wood, stone and concrete. Ideal for ceilings and walls indoors.
Application: Sealing primer for effective "blocking" of water stains, mould, nicotine etc. and for improving the adhesion of subsequent paint coats.
Product benefits:
- Effective "blocking" of water stains
- High sealing power
- Very good adhesion
- For walls and ceilings (indoors)
- Easy to process
- Fast drying
- Very economic
Binding agent base: Special coating resins
Spray application: for 2 -3 cross coats: 40-50 μm
Spray distance: 15-25 cm
Drying times: dust-dry: after approx. 20 min.
Fast-to-handling: after approx. 60 min.
Dry-hard: after approx. 12 hours
Recoating: Can be painted over with all belton paints (also clearcoat) after 3 hours
With itself: at any time
Paint structure:
- 1. belton basic Anti-stain Primer
- 2. Top coat / belton spray paint (colour tone)
Note: Before priming, clean, degrease and remove any rust from objects that are to be painted. To ensure optimum adhesion of the paint, sand before and after priming. The surface to be painted must be clean, dry and free of grease.
Часто покупают вместе
