Name: Краска-эмаль, для металлоконструкций, защита от коррозии Dekoral Special, блестящий, 0.65 l, темно-серый цв.
Brand: Dekoral
Price: 5.67 EUR
Availability: OutOfStock

Информация о товаре

Общие характеристики

Тип продукта

Эмалевая краска

Бренд

Dekoral

Коллекция

Special

Объем в упаковке, л

0.65

Тип краски

Эмалевая

Тип эмали

Антикоррозийный

Оттенок краски

Серый цв.

Название цвета

Темно-серый цв.

Блеск

Блестящий

Разбавитель

Не разбавлять

Для отделочных работ

Внутри и снаружи

функция краски

Для металлоконструкций, защита от коррозии

Расход

9 м²/л

Рабочие инструменты

Валик, Кисть, Разбрызгиватель

Подходит для горячих поверхностей

Нет

Время высыхания до касания

2 - 3 час

Полностью сухая после

24 час

Право предъявления претензии для физических лиц

24 месяц

Заметил ошибку в описании товара, в таблице характеристик или в галерее фотографий? Сообщи нам об этом

Цвет товара может отличаться от того, что видно на фотографии.

Описание товара на английском языке:

The most important features:

Long-lasting painting effect
Excellent adhesion to the ground
Easy to use
No ground, no undercoat

Short description:

Corrosion-resistant enamel is intended for painting steel and cast iron objects as well as steel construction elements without the need for prior application of primer and primer paints. It is recommended for both interior and exterior painting.

Application method:

Preparation of the substrate

The steel and cast iron substrate should be carefully cleaned by removing oils, greases, dust, loose-fitting rust and old peeling paint with a wire brush, sandpaper or mechanical tools.
When renovating paints, old coatings should be matt with sandpaper and dusted off. Cracked and flaky coatings should be removed before painting.

painting

Before use, the product should be mixed thoroughly.
If necessary, it is recommended to dilute the product with a diluent for general-purpose phthalo products (max 3% by weight).
Paint with a brush, roller or spray.
For long-term corrosion protection, we recommend applying 2-3 coats. The next layer can be applied between 1 and 2 hours after applying the previous one or after 24 hours.

Additional information

Paint at a substrate temperature of + 10ºC to + 25ºC.
After finishing the painting, the tools should be cleaned with a thinner for general-purpose phthalo products.

Safety instructions and PPO

Flammable product.
Keep away from children.
Do not empty into drains.
If swallowed, seek medical advice immediately - show the packaging or label.
Use only in well-ventilated areas.
Store in tightly closed packaging away from sources of heat and fire.
During painting works and after their completion, ventilate a specific odor before use.
Follow the instructions on the packaging.
Detailed information is included in the Material Safety Data Sheet.