The Alphacool Eisbaer Pro Aurora offers a much higher cooling surface than the normal Eisbaer Aurora. It was specially developed for extremely large CPU DIEs and completely covers processors such as the AMD Threadripper but also the AMD Ryzen CPUs. The Eisbaer Pro has also been designed for the Intel Socket 3647 to ensure the best possible cooling performance of the entire CPU.
Large cooling surface
The cooler base naturally covers the entire surface of the respective processors. The area of the cooling fins is around 55 x 42 mm taller than all known processor cores. This ensures that all hotspots of a CPU are flushed directly with water and optimally cooled. With the included AM4 bracket, cooling an AMD Ryzen processor is also child's play. The cooling fins are 0.4 mm thick and are also at an optimal distance of 0.4 mm from one another. There are a total of 58 cooling fins on the radiator base. The bottom of the cooler is only 3 mm thick, which means that the heat can reach the water and be dissipated as quickly as possible.
Copper radiator
As usual with Alphacool, the radiators are made of copper. Alphacool is the first manufacturer worldwide to use copper for all water-bearing components such as the antechambers, cooling fins and cooling channels. The connection threads are made of brass for reasons of hardness. The cooling fins are also only very lightly painted. If you look closely, the copper shimmers through a little. A thick coating would reduce the cooling capacity. The fin density is an optimal 15FPI. As a result, the radiator works perfectly even with low airflow. Too high a fin density would require fans with a higher speed to achieve the same cooling performance. A lower fin density would no longer benefit from fast rotating fans. So the golden mean was chosen.
Real water cooling
The Eisbaer Pro Aurora consists almost entirely of real water cooling components. The extremely robust and durable TPV hoses are also used in Enterprise products for servers and workstations. The hose connections also come from Alphacool's Enterprise series and use the standard G1 / 4 “thread. This makes the Eisbaer Pro Aurora fully compatible with all common water cooling products. The quick-release fastener allows the AIO to be easily expanded with additional components. Above all, the pre-filled radiators and the Eiswolf GPU AIO water cooling should be named here.
Fan and lighting
The entire Eisbaer Aurora cooler was equipped with addressable, digital RGB LEDs. This gives you a real eye-catcher in the case. The Aurora Rise Fan with 120mm is used as a fan. Thanks to the special blade design, the fan is extremely quiet and the addressable RGB LEDs ensure brilliant lighting. The Alphacool Aurora Rise fan impresses with a maximum statistical pressure of 3.17mm / H2O and offers a maximum air flow of 119.8m³ / h. Thanks to the PWM control, the fan can be controlled over a wide speed range. It also offers zero control. It can therefore be regulated down to 0 rpm and then starts at approx. 350 rpm. Of course, all digital RGB LEDs can be controlled as desired. Almost all effects are possible, depending on the controller.
How is everything connected
The fans are controlled normally via a 4-pin PWM connector. A Y-adapter for the fans included in the scope of delivery makes it easier to connect to the mainboard. This means that all fans can be controlled and regulated via one connection. Each fan has a 3-pin JST connector including a Y adapter for the LED lighting. This allows the fans to be connected directly and controlled synchronously via a controller. A corresponding adapter is included for connection to a typical 3-pin 5V connection. Alternatively, the enclosed digital RGB controller can also be used. The pump of the Eisbaer Aurora uses a 3-pin Molex connector. This can also be connected to the mainboard. The Eisbaer Pro Aurora is a real all-rounder.
