Preces informācija
Ohne Hersteller Acrylic Glass GS Transparent Yellow 500x500mm
Preces apraksts angļu valodā:
Many housing manufacturers now offer models with integrated side windows, which allow a view into the interior and on the installed hardware. Only then it becomes possible that the high-end components or the elaborate modding can be adequately appreciated. On the other hand, the available Windows offer only a limited design bandwidth. Although occasionally experimented with special forms, most companies are looking for only rectangular acrylic glass panes in clear appearance.
However, it does not have to stay that way, assuming some manual skill. With a wide range of numerous colors and sizes, a variety of modifications can be realized. With a Dremel, for example, an individually shaped opening can be milled into the side wall of the housing, in order to subsequently secure an acrylic glass pane behind it. But the disc shape itself is customizable. In addition, engravings can be milled into the surface, thus ensuring a unique style.
These are acrylic glass GS. This relatively break-resistant, weather-resistant and highly transparent, thermoplastic material can be molded and processed well. It can be milled, drilled and sawed and can be formed at temperatures of 160 to 180 degrees Celsius. On the other hand, this requires that, when sawing with electrical assistance, care must be taken to ensure that the saw blade does not become too hot, as otherwise the interface may immediately stick again after the pass. Otherwise, care must be taken to be careful.
This version is colored yellow, UV-active, transparent and with 500 x 500mm size and 3mm thickness, for example, suitable for larger housings. The acrylic plate is glossy on both sides, each with a protective film.
However, the fluorescent property is hardly visible on the surface itself. Rather, the plate breaks the incoming light and directs it to the outer edges of the cut, meaning that they light up and make the UV activity more visible. This effect can be effectively used especially when milled in the plate structures, or whole pieces are cut out.
Technical details:
Preces apraksts angļu valodā:
Many housing manufacturers now offer models with integrated side windows, which allow a view into the interior and on the installed hardware. Only then it becomes possible that the high-end components or the elaborate modding can be adequately appreciated. On the other hand, the available Windows offer only a limited design bandwidth. Although occasionally experimented with special forms, most companies are looking for only rectangular acrylic glass panes in clear appearance.
However, it does not have to stay that way, assuming some manual skill. With a wide range of numerous colors and sizes, a variety of modifications can be realized. With a Dremel, for example, an individually shaped opening can be milled into the side wall of the housing, in order to subsequently secure an acrylic glass pane behind it. But the disc shape itself is customizable. In addition, engravings can be milled into the surface, thus ensuring a unique style.
These are acrylic glass GS. This relatively break-resistant, weather-resistant and highly transparent, thermoplastic material can be molded and processed well. It can be milled, drilled and sawed and can be formed at temperatures of 160 to 180 degrees Celsius. On the other hand, this requires that, when sawing with electrical assistance, care must be taken to ensure that the saw blade does not become too hot, as otherwise the interface may immediately stick again after the pass. Otherwise, care must be taken to be careful.
This version is colored yellow, UV-active, transparent and with 500 x 500mm size and 3mm thickness, for example, suitable for larger housings. The acrylic plate is glossy on both sides, each with a protective film.
However, the fluorescent property is hardly visible on the surface itself. Rather, the plate breaks the incoming light and directs it to the outer edges of the cut, meaning that they light up and make the UV activity more visible. This effect can be effectively used especially when milled in the plate structures, or whole pieces are cut out.
Technical details:
- Dimensions: 500 x 500 x 3 mm (WxHxD)
- Material: acrylic glass GS
- Color: yellow, UV-active
- Max. Temperature: 70 - 80 ° C
- Properties:
Relatively unbreakable (compared to glass)
weather-resistant,
highly transparent,
easy to form and process
Bieži pirkts kopā
Gaismas diožu apgaismojuma slēdzis Impactics 19mm IP65 LED Blue, zila krās.
19,69 €
Parastā cena
24,19 €
