Name: Operatīvā atmiņa (RAM) Kingston HyperX Fury Red HX318C10FR/4, DDR3 (RAM), 4 GB, 1866 MHz
Brand: Kingston
Price: 36.08 EUR
Availability: OutOfStock

Preces informācija

Kopējie parametri

Produkta veids

Operatīvā atmiņa (RAM)

Zīmols

Kingston

Sērija

HyperX Fury Red

Modelis

HX318C10FR/4

Komplektācija

1 moduļa komplekts

Tehniskie parametri

Operatīvās atmiņas tips

DDR3 (RAM)

Atmiņas ietilpība

4 GB

Atmiņas ciklu aizture

CL10

Kopnes ātrums

1866 MHz

Spriegums

1.5 V

X.M.P.

Nē

Papildus

Obligātā garantija

24 mēn

Papildus informācija

240-pin DIMM Siltuma izkliedētājs

Vai pamanīji kļūdu preces aprakstā, specifikāciju tabulā vai fotoattēlu galerijā? Ziņo mums

Preces krāsa var atšķirties no fotoattēlā redzamās.

Kingston 4GB DDR3 PC14900 CL10 DIMM HyperX Fury Red Series
Preces apraksts angļu valodā:

HyperX HX318C10FR/4 is a 512M x 64-bit (4GB) DDR3-1866 CL10 SDRAM (Synchronous DRAM) 1Rx8 memory module, based on eight 512M x 8-bit DDR3 FBGA components. This module has been tested to run at DDR3-1866 at a low latency timing of 10-11-10 at 1.5V. Additional timing parameters are shown in the PnP Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:

JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
VDDQ = 1.5V (1.425V ~ 1.575V)
933MHz fCK for 1866Mb/sec/pin
8 independent internal bank
Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6
Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
8-bit pre-fetch
Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
Bi-directional Differential Data Strobe
Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
On Die Termination using ODT pin
Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
Asynchronous Reset
PCB : Height 1.180” (30.00mm), single sided component