Name: Operatīvā atmiņa (RAM) Kingston HyperX Fury White HX318C10FWK2/16, DDR3 (RAM), 16 GB, 1866 MHz
Brand: Kingston
Price: 74.49 EUR
Availability: OutOfStock

Preces informācija

Kopējie parametri

Produkta veids

Operatīvā atmiņa (RAM)

Zīmols

Kingston

Sērija

HyperX Fury White

Modelis

HX318C10FWK2/16

Komplektācija

2 moduļu komplekts

Tehniskie parametri

Operatīvās atmiņas tips

DDR3 (RAM)

Atmiņas ietilpība

16 GB

Atmiņas ciklu aizture

CL10

Kopnes ātrums

1866 MHz

Spriegums

1.5 V

X.M.P.

Jā

Papildus

Obligātā garantija

24 mēn

Papildus informācija

240-pin DIMM Siltuma izkliedētājs Non-ECC Unbuffered

Vai pamanīji kļūdu preces aprakstā, specifikāciju tabulā vai fotoattēlu galerijā? Ziņo mums

Preces krāsa var atšķirties no fotoattēlā redzamās.

Kingston 16GB DDR3 PC314900 CL10 HyperX Fury White
Preces apraksts angļu valodā:

HyperX HX318C10FWK2/16 is a kit of two 1G x 64-bit (8GB) DDR3-1866 CL10 SDRAM (Synchronous DRAM) 2Rx8 memory modules, based on sixteen 512M x 8-bit DDR3 FBGA components per module. Total kit capacity is 16GB. Each module kit has been tested to run at DDR3-1866 at a low latency timing of 10-11-10 at 1.5V. Additional timing parameters are shown in the PnP Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:

JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
VDDQ = 1.5V (1.425V ~ 1.575V)
933MHz fCK for 1866Mb/sec/pin
8 independent internal bank
Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6
Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
8-bit pre-fetch
Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or MRS]
Bi-directional Differential Data Strobe
Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
On Die Termination using ODT pin
Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
Asynchronous Reset
PCB : Height 1.180” (30.00mm), double sided component