Name: Operatīvā atmiņa (RAM) Kingston HyperX Savage HX318C9SR/4, DDR3 (RAM), 4 GB, 1866 MHz
Brand: Kingston
Price: 33.2 EUR
Availability: OutOfStock

Preces informācija

Kopējie parametri

Produkta veids

Operatīvā atmiņa (RAM)

Zīmols

Kingston

Sērija

HyperX Savage

Modelis

HX318C9SR/4

Komplektācija

1 moduļa komplekts

Tehniskie parametri

Operatīvās atmiņas tips

DDR3 (RAM)

Atmiņas ietilpība

4 GB

Atmiņas ciklu aizture

CL9

Kopnes ātrums

1866 MHz

Spriegums

1.5 V

X.M.P.

Jā

Papildus

Obligātā garantija

24 mēn

Papildus informācija

Alumīnija siltuma izkliedētājs Non-ECC Unbuffered

Vai pamanīji kļūdu preces aprakstā, specifikāciju tabulā vai fotoattēlu galerijā? Ziņo mums

Preces krāsa var atšķirties no fotoattēlā redzamās.

Kingston 4GB DDR3 PC14900 CL9 HyperX Savage
Preces apraksts angļu valodā:

HyperX HX318C9SR/4 is a 512M x 64-bit (4GB) DDR3-1866 CL9 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components per module. Each module supports Intel® XMP (Extreme Memory Profiles). Each module has been tested to run at DDR3-1866 at a low latency timing of 9-10-11 at 1.5V. The SPDs are programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. Each 240-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:

JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
VDDQ = 1.5V (1.425V ~ 1.575V)
800MHz fCK for 1600Mb/sec/pin
8 independent internal banks
Programmable CAS latency: 11, 10, 9, 8, 7, 6
Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
8-bit pre-fetch
Burst Length: 8 (interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write (either on the fly using A12 or MRS)
Bi-directional Differential Data Strobe
Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%)
On Die Termination using ODT pin
Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°Cº
Asynchronous Reset
PCB: Height 1.180” (30.00mm), single sided component