Preces informācija
DEMCiflex Dust Filter 80mm White DF0687
Preces apraksts angļu valodā:
If you open your PC again after half a year, perhaps to install new hardware, one wonders most of the time whether the Rechenknecht is not better to call a vacuum cleaner. What makes it easier on the one hand - imagine just how much more often the room would have to be cleaned if all the dirt was not collected as a precaution by the computer - means elsewhere consuming cleaning of the PC interior.
In addition, dust in the housing is the main reason for overheating and thus for possible, unstable operation. Although a cleaning time-to-time can not be prevented, however, the effort can be significantly reduced. A simple and cost-effective solution are dust filters, which are placed in front of the sucking fans. Once installed, it is no longer necessary to dedust the entire interior with all its inaccessible corners and sensitive components, only the filters.
DEMCiflex offers a particularly easy-to-retrofit solution, which in this case is suitable for 80 mm fans. Here, the filter is simply placed from the outside of the housing on the fan opening and is held there magnetically. There are therefore no screws or the like necessary, so there is no compatibility restriction. Since not all fan positions are magnetically attractive, an additional frame to the scope of delivery is glued to the back and on which the filter is held.
The filter itself consists of a very tightly woven and durable polyester fabric. This special material is also used in clinics, for example to keep operating theaters dust-free. At the same time, the net is well permeable to air and therefore hinders the airflow only slightly.
Of course, this effect diminishes with increasing dust, which is why the filter should occasionally be removed and cleaned. Due to the special mounting method, the removal of the fan is again very easy and fast. Afterwards, the dust can either be brushed, shaken, washed off and even scraped off with stubborn dirt.
Note:The area around the used fan slot should be flat if possible and have no protruding parts. Otherwise, these may impair adhesion to the substrate.
Technical details:
Preces apraksts angļu valodā:
If you open your PC again after half a year, perhaps to install new hardware, one wonders most of the time whether the Rechenknecht is not better to call a vacuum cleaner. What makes it easier on the one hand - imagine just how much more often the room would have to be cleaned if all the dirt was not collected as a precaution by the computer - means elsewhere consuming cleaning of the PC interior.
In addition, dust in the housing is the main reason for overheating and thus for possible, unstable operation. Although a cleaning time-to-time can not be prevented, however, the effort can be significantly reduced. A simple and cost-effective solution are dust filters, which are placed in front of the sucking fans. Once installed, it is no longer necessary to dedust the entire interior with all its inaccessible corners and sensitive components, only the filters.
DEMCiflex offers a particularly easy-to-retrofit solution, which in this case is suitable for 80 mm fans. Here, the filter is simply placed from the outside of the housing on the fan opening and is held there magnetically. There are therefore no screws or the like necessary, so there is no compatibility restriction. Since not all fan positions are magnetically attractive, an additional frame to the scope of delivery is glued to the back and on which the filter is held.
The filter itself consists of a very tightly woven and durable polyester fabric. This special material is also used in clinics, for example to keep operating theaters dust-free. At the same time, the net is well permeable to air and therefore hinders the airflow only slightly.
Of course, this effect diminishes with increasing dust, which is why the filter should occasionally be removed and cleaned. Due to the special mounting method, the removal of the fan is again very easy and fast. Afterwards, the dust can either be brushed, shaken, washed off and even scraped off with stubborn dirt.
Note:The area around the used fan slot should be flat if possible and have no protruding parts. Otherwise, these may impair adhesion to the substrate.
Technical details:
- Size (frame): 105 x 105 mm
- Size (filter): 80 x 80 mm
- Compatibility: 80 mm fan slot
- Material (filter): polyester mesh
- Color: white (frame), white (filter)
- Mounting: magnetic bracket + mounting frame
- Advantages:
Fast installation
No compatibility
restriction Easy and quick cleaning
Effective filter effect with high air permeability
Durable fabric
Bieži pirkts kopā
TOP prece
0 € uz pakomātu
Trauku žāvētājs King Hoff KH-1716, 43 cm x 32 cm x 27 cm, plastmasa/metāls, melna krās.
22,32 €
Parastā cena
38,90 €
Trauku žāvētājs King Hoff KH-1500, 56.5 cm x 25 cm x 38 cm, metāls, melna krās.
37,90 €
Parastā cena
44,90 €
0 € uz pakomātu
Trauku žāvētājs Springos, 30 cm x 50 cm x 24 cm, plastmasa/tērauds, melna krās.
25,09 €
Parastā cena
33,90 €
Trauku žāvētājs Okko, 53.5 cm x 24.5 cm x 37 cm, tērauds/polipropilēns (pp), hroma krās.
14,99 €
Parastā cena
22,99 €
