Name: Ūdens bloks EK Water Blocks, sudraba krās.
Brand: EK Water Blocks
Price: 147.5 EUR
Availability: OutOfStock

Preces informācija

Kopējie parametri

Produkta veids

Ūdens bloki

Zīmols

EK Water Blocks

Paredzētas lietošanai

Videokartei

Krāsa

Sudraba krās.

Papildus informācija

Ar RGB apgaismojumu

Vai pamanīji kļūdu preces aprakstā, specifikāciju tabulā vai fotoattēlu galerijā? Ziņo mums

Preces krāsa var atšķirties no fotoattēlā redzamās.

The EK-Quantum Vector RTX RE Ti D-RGB from EK Water Blocks is a high-quality and powerful heat sink for custom water cooling. It is suitable for all NVIDIA GeForce RTX 2080 Ti graphics cards with PCB in reference design. Thanks to the optimized channel structure and nickel-plated electrolytic copper block, efficient cooling of the GPU, memory and voltage converter is guaranteed. The heat sink also provides a chic and elegant look thanks to its transparent acrylic glass lid and integrated RGB LED lighting. The EKWB EK-Quantum Vector RTX RE Ti D-RGB water cooling block at a glance:

Custom-fit for NVIDIA RTX 2080 Ti graphics cards with reference PCB
Effective cooling performance thanks to nickel-plated electrolytic copper base
Elegant look thanks to transparent acrylic glass lid
Four G1 / 4-inch connections for integration into the circuit
Integrated, addressable RGB LED lighting

Why should I cool my graphics card with water? Top performance is still bought in the graphics card segment with an equally top heat development. Because only if the clock screw is turned as far as it will go and the calculation units are used right down to the last segment can the decisive advantage be achieved over the competition. Smaller structure widths and more efficient layouts can limit this problem, but they cannot be completely eliminated. Because, as expected, the next generation will be challenged to the maximum.

The problem is exacerbated by overclocking because the temperatures can reach critical values. In short: If you want a low volume in gaming or even benching and possibly want to turn the clock screw at the same time, you can hardly avoid water cooling. In addition to the usual components (radiator, pump, expansion tank), a suitable cooler for the graphics card is of course necessary - such as this model from the Wakü specialist EK Water Blocks. Optics and connections of the EK-Quantum Vector RTX RE Ti D-RGB It is a full block design , which covers all relevant heat sources of the graphics card and thus effectively cools - i.e. the GPU, the memory and the voltage converter. Nickel-plated electrolytic copper and an optimized channel structure are used to optimally transfer the heat.

The lid is made of transparent acrylic glass. The integrated and addressable RGB LED lighting is compatible with MSI Mystic Light Sync, ASUS Aura Sync, Gigabyte RGB Fusion and ASRock Polychrome Sync. The connection terminal has four holes (G1 / 4-inch thread). Due to the flat design of the cooler, the connection of several graphics cards in a network is also possible without any problems.

Note 1:Connections that are not included in the scope of delivery are required for integration into the cooling circuit. 1 g of thermal paste and thermal pads are already included to make contact between the cooler and the graphics card. Make sure that the cooler is only suitable for NVIDIA RTX 2080 Ti graphics cards ! The original cooler must be removed before assembly, which can invalidate the manufacturer's guarantee.

Technical details:

Material: nickel-plated electrolytic copper (bottom), acrylic (lid)
silver
Thread: 4x G1 / 4 inches
Scope of delivery:
EK-Quantum Vector RTX RE Ti D-RGB cooler
Mounting material
2x G1 / 4 "sealing
plugs 6mm Allen key
Thermal
pads Thermal paste EK-TIM Ectotherm (1g)

Attention: Please note that some coolers are delivered with a protective film on the bottom. This must always be removed before assembly and commissioning. We accept no liability for damage caused by incorrect or incorrect assembly and improper use!